KJ6YWD.NET
v2.0
KJ6YWD Packet
Uptime: 1 week, 4 days, 18 hours, 42 minutes
System: Linux kj6ywd-gw 6.12.47+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.12.47-1+rpt1~bookworm (2025-09-16) aarch64
Load: 0.28, 0.22, 0.19
Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=5, f=1) KE6CHO-5 audio level = 138(35/21) _|||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=5, f=1) KE6CHO-5 audio level = 136(33/21) _|||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=5, f=1) KE6CHO-5 audio level = 137(34/20) __||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=5, f=1) KE6CHO-5 audio level = 137(30/20) _|||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=5, f=1) KE6CHO-5 audio level = 137(31/19) _||||||__ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=5, f=1) KE6CHO-5 audio level = 137(33/20) _|||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=6, f=1) KE6CHO-5 audio level = 137(32/19) _|||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=6, f=1) Digipeater KRDG audio level = 82(26/17) __||||___ [0.3] AE6OR>BEACON,KBERR,KRDG*,KBERR,WOODY,KBETH,TAHOE:Hello from 5W Garage packet node AUBURN 73's Steli !<0x0d> ERROR!!! Unknown APRS Data Type Indicator "H" Use of "BEACON" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (AE6OR) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid KE6CHO-5 audio level = 137(31/20) __||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=6, f=1) KE6CHO-5 audio level = 136(29/20) __||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=6, f=1) KE6CHO-5 audio level = 137(34/22) _|||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=6, f=1) KE6CHO-5 audio level = 137(31/20) __||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=6, f=1) KE6CHO-5 audio level = 136(30/24) __||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(RR res, n(r)=6, f=1) Digipeater KRDG audio level = 82(28/19) __||||___ [0.3] K7BBS>BEACON,HMKR,KRDG*,KBANN,KBETH,WOODY,KJOHN,KROCK:HMKR,KRDG,KBANN,KBETH,KLPRC3,WOODY,KJOHN,KROCK<0x0d> ERROR!!! Unknown APRS Data Type Indicator "H" Use of "BEACON" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (K7BBS) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid KE6CHO-5 audio level = 137(30/21) _|||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>W7VW-1:(UA res, f=1) Digipeater KRDG audio level = 75(24/16) __||||___ [0.3] KM6HK>BEACON,KBULN,WOODY,KBERR,KRDG*,HMKR:QST <0x0d>QST Join the Packet Chat-Room: https://groups.io/g/145050PacketNetwork<0x0d>QST ERROR!!! Unknown APRS Data Type Indicator "Q" Use of "BEACON" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (KM6HK) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid KE6CHO-4 audio level = 115(32/19) _|||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-4>ID:KE6CHO-4/R RDG/D RBOX/B KRDG/N<0x0d> ERROR!!! Unknown APRS Data Type Indicator "K" Use of "ID" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (KE6CHO-4) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid [0L] KJ6YWD-10>JIM,KRDG,KBERR,WOODY,KJOHN,KBULN,BRKNRG,KLPRC3:KJ6YWD-1/MBOX 44.2.50.1/kj6ywd.net 73 from Redding! Digipeater KRDG audio level = 94(16/12) __||_____ [0.2] KJ6YWD-10>JIM,KRDG*,KBERR,WOODY,KJOHN,KBULN,BRKNRG,KLPRC3:KJ6YWD-1/MBOX 44.2.50.1/kj6ywd.net 73 from Redding! ERROR!!! Unknown APRS Data Type Indicator "K", UNKNOWN vendor/model KE6CHO-4 audio level = 116(28/18) __||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-4>ID:KE6CHO-4/R RDG/D RBOX/B KRDG/N<0x0d> ERROR!!! Unknown APRS Data Type Indicator "K" Use of "ID" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (KE6CHO-4) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid KE6CHO-5 audio level = 123(29/18) _|||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-5>ID:Network Node (RDG)<0x0d> ERROR!!! Unknown APRS Data Type Indicator "N" Use of "ID" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (KE6CHO-5) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid KE6CHO-5 audio level = 67(24/18) __||||___ [0.3] KE6CHO-5>NODES:(UI cmd, p=0)<0xff>RDG <0x96><0x8c>l<0x88><0xa2><0xaa><0x12>BANNER<0x96><0x8c>l<0x88><0xa2><0xaa><0x12><0xc0><0xae><0x82>l<0x96><0xa2><0x84><0x0a>ELSO <0x96><0x8c>l<0x88><0xa2><0xaa><0x12><0x90><0xae>n<0xac><0xae>@@<0x02>HMKR <0xae>n<0xac><0xae>@@<0x02><0xc0><0x96><0x8c>l<0x82><0x9c><0xb0><0x08>JOHN <0xae><0x84>l<0xb2><0x9c><0x9a><0x0a><0x90><0xae>n<0xac><0xae>@@<0x00>HMKRBB<0xae>n<0xac><0xae>@@<0x02><0xbf><0xae>n<0xac><0xae>@@<0x0c>HMKRCH<0xae>n<0xac><0xae>@@<0x02><0xbf> KE6CHO-5 audio level = 67(25/15) ___|||___ [0.4] KE6CHO-5>NODES:(UI cmd, p=0)<0xff>RDG <0x9c>l<0xb4><0xb0>@@<0x0a>WBAY <0xae><0x84>l<0xb2><0x9c><0x9a><0x0a><0x90><0x96>l<0x92><0xb0><0x82>@<0x0a>BULN <0xae><0x84>l<0xb2><0x9c><0x9a><0x0a><0x90><0x96><0x8c>l<0x82><0x9c><0xb0><0x0a>HILL <0xae><0x84>l<0xb2><0x9c><0x9a><0x0a><0x90><0x96><0x92>l<0x94><0x82><0xa6><0x0c>NITE <0xae><0x84>l<0xb2><0x9c><0x9a><0x0a><0x8f><0xae><0x84>l<0xb2><0x9c><0x9a><0x06>BETHEL<0xae><0x84>l<0xb2><0x9c><0x9a><0x0a><0x90><0x96>l<0x8c><0x84>@@<0x0a>ROCK <0xae><0x84>l<0xb2><0x9c><0x9a><0x0a><0x90> KE6CHO-5 audio level = 67(26/15) __||||___ [0.3] KE6CHO-5>NODES:(UI cmd, p=0)<0xff>RDG <0x9c>n<0xb0><0x84><0x94>@<0x0a>XBJ <0xae>n<0xac><0xae>@@<0x02><0x90><0x96><0x86>n<0x90><0x8a><0xb0><0x0a>MED <0xae>n<0xac><0xae>@@<0x02><0x90><0x9c>l<0x82><0x86><0x96>@<0x08>LPRC3 <0xae><0x84>l<0xb2><0x9c><0x9a><0x0a><0x8f><0xae><0x82>l<0xa4><0xa0><0x88><0x0a>TRACY <0x96><0x8c>l<0x88><0xa2><0xaa><0x12><0x90><0xae><0x84>l<0xb2><0x9c><0x9a><0x0a>BERRY <0xae><0x84>l<0xb2><0x9c><0x9a><0x0a><0xc0><0xae>l<0x9e><0x82><0x96>@<0x0a>OAK <0x96><0x8c>l<0x88><0xa2><0xaa><0x12><0x90> KE6CHO-5 audio level = 104(28/19) __||||___ [0.3] KE6CHO-5>NODES:(UI cmd, p=0)<0xff>RDG <0x96><0x88>n<0x84><0x9a><0x96><0x02>GPASS <0xae>n<0xac><0xae>@@<0x02><0x90><0x96><0x9a>l<0x98><0xb2><0xae><0x08>COOL <0xae><0x84>l<0xb2><0x9c><0x9a><0x0a><0x90> Digipeater KRDG audio level = 82(26/19) __||||___ [0.3] AE6OR>BEACON,KBERR,KRDG*,KBERR,WOODY,KBETH,TAHOE:Hello from 5W Garage packet node AUBURN 73's Steli !<0x0d> ERROR!!! Unknown APRS Data Type Indicator "H" Use of "BEACON" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (AE6OR) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid KE6CHO-4 audio level = 116(28/20) __||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-4>ID:KE6CHO-4/R RDG/D RBOX/B KRDG/N<0x0d> ERROR!!! Unknown APRS Data Type Indicator "K" Use of "ID" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (KE6CHO-4) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid [0L] KJ6YWD-10>JIM,KRDG,KBERR,WOODY,KJOHN,KBULN,BRKNRG,KLPRC3:KJ6YWD-1/MBOX 44.2.50.1/kj6ywd.net 73 from Redding! Digipeater KRDG audio level = 94(16/12) __||||___ [0.3] KJ6YWD-10>JIM,KRDG*,KBERR,WOODY,KJOHN,KBULN,BRKNRG,KLPRC3:KJ6YWD-1/MBOX 44.2.50.1/kj6ywd.net 73 from Redding! ERROR!!! Unknown APRS Data Type Indicator "K", UNKNOWN vendor/model Digipeater KRDG audio level = 67(24/16) __||||___ [0.3] KC7HEX>BEACON,HMKR,KRDG*,KBANN,KBETH,KLPRC3,WOODY,KJOHN,KROCK:K-Net MED & KaNode KMED located West Spur of RoxyAnne at 1850' MEDFORD OREGON<0x0d> ERROR!!! Unknown APRS Data Type Indicator "K" Use of "BEACON" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (KC7HEX) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid KE6CHO-4 audio level = 116(31/19) _|||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-4>ID:KE6CHO-4/R RDG/D RBOX/B KRDG/N<0x0d> ERROR!!! Unknown APRS Data Type Indicator "K" Use of "ID" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (KE6CHO-4) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid Digipeater KRDG audio level = 91(30/18) _|||||___ [0.3] K7BBS>ID,HMKR,KRDG*,KBANN,KBETH,WOODY,KJOHN,KROCK:K7BBS/R K7BBS-1/B KPHXOR/N<0x0d> ERROR!!! Unknown APRS Data Type Indicator "K" Use of "ID" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (K7BBS) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid KE6CHO-4 audio level = 116(28/19) _|||||___ Audio input level is too high. This may cause distortion and reduced decode performance. Solution is to decrease the audio input level. Setting audio input level so most stations are around 50 will provide good dyanmic range. [0.3] KE6CHO-4>ID:KE6CHO-4/R RDG/D RBOX/B KRDG/N<0x0d> ERROR!!! Unknown APRS Data Type Indicator "K" Use of "ID" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (KE6CHO-4) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid Digipeater KRDG audio level = 83(27/18) __||||___ [0.3] AE6OR>BEACON,KBERR,KRDG*,KBERR,WOODY,KBETH,TAHOE:Hello from 5W Garage packet node AUBURN 73's Steli !<0x0d> ERROR!!! Unknown APRS Data Type Indicator "H" Use of "BEACON" in the destination field is obsolete. You can help to improve the quality of APRS signals. Tell the sender (AE6OR) to use the proper product identifier from https://github.com/aprsorg/aprs-deviceid